Now it’s time to measure. You can begin with measuring the total linear footage of the perimeter – most easily achieved using a measuring wheel. Walking the perimeter line with your measuring wheel will allow you an opportunity to determine where a perimeter product should be installed and how much of it you need. Remember that steeply graded areas or areas without a constructed restraint, such as a retaining wall or sidewalk, will likely require a perimeter board – such as Bend-a-Board.
preparing for artificial grass perimeters
This 1.5″x1.5″x12′ Bend-a-Board acts as a perimeter for the artificial turf being installed against a fence.
Next, calculate the actual square footage. To do so, simply multiply the length and width of the install area, but don’t forget to subtract planters, trees, and other areas within the perimeter that would not be replaced with turf, as the goal is to establish the true square footage so that we know the minimum amount of artificial grass required. If needed, here is a handy square footage calculator.
After you’ve established the length of the perimeter and calculated the true square footage, you will have enough information to determine the linear footage of grass required for the project. Though, factors such as the grass’ roll width, the desired grain orientation, as well as the shape and size of the installation area will impact this number. For example, if a job site is odd-shaped and orienting the grass grain in the standard direction increases the material cost, then you may elect to install in a different direction. Alternatively, you could consider a 13-foot-wide product rather than a 15-foot-wide to reduce material waste.